Technicolor - Thomson TG122N - Manual (Page 16)

10
3 ASSOCIATE YOUR WIRELESS USB ADAPTOR TO YOUR ACCESS POINT
E-DOC-CTC-20100623-0002 v2.0
3.1.2 Procedure for All Access Points
Procedure
Proceed as follows:
1 Double-click the Wireless Configuration Utility icon ( ) in the notification area.
2 The Wireless Configuration Utility appears.
3 Click WPS.
4 The WiFi Protected Setup wizard appears:
Following options are available:
 Push the button on my access point.
If you select this option, you will have to push a button on your access point to start the WPS registration.
 Enter the PIN from my access point.
If you select this option, you will have to enter a PIN code provided by your access point. If you are using a Technicolor
access point, you can find this PIN code on a label on your Technicolor access point.
5 Select the option of your choice and click Next.
6 Follow the instructions.