Toshiba CIX - Manual (Page 26)

The Grand Tour
DKT2000-series Telephones
12
Strata CIX and CTX IPT/DKT Telephone 03/05
Flexible Buttons
All Flexible Buttons must be programmed for your telephone in system programming
and vary for individual telephones. If a button does not appear on your display or
telephone keystrip label, see your System Administrator for button assignments.
Line Buttons
You may have buttons designated as
Line
and/or
Pooled Line Grp
which enable
you to directly access outside lines.
Pooled Line Grp
enables you to access
available CO Lines from a group of lines appearing under one button.
Liquid Crystal Display
Your Liquid Crystal Display (LCD)
(shown right) shows:
• Desk Clock and Calendar in idle
mode
• Call Duration during an outside call
• Operational, Advisory, and
Notification messages
Important! The LCD width of the DKT2000-series telephones is shorter than the
IPTs and DKT3000-series LCDs. This difference causes some features
to display differently.
LCD Control Buttons
There are two types of LCD button functions: LCD Control Buttons and Soft Keys.
The DKT2000-series LCD Control Buttons consist of
Mode
,
Page
and
Scroll
. In
this book these buttons are replaced with SK1, SK2 and SK3.
When the Soft Key prompts appear on the LCD, the LCD Control Button just below
the prompt offers access to that feature. See
“Using Your LCD” on page 31 for more
information.
•
SK1
is generally used as a Soft Key.
• Pressing
SK2
switches you from the Call Forward (CF) display to the User Name
display.
• Pressing
SK3
advances you through information.
5909
Mode Page Scroll
LCD Control
Buttons/Soft Keys
AUG 08 MON 03:56
CF-ALL 202-203+