Toshiba SATELLITE A60 - Manual (Page 108)

108 Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.3
Starting again after Turn Off or Shut down
To start the computer up again, press and release the power
button. The on/off light turns on.
Using Hibernation
When Hibernation is enabled, you can put the computer into
Hibernation in more than one way.
Enabling the Hibernation command
Hibernation enabled is a default setting. If it should become
disabled, you can enable it by right-clicking the Power Saver
icon in the system tray.
For more information about the Power Saver utility, see
“Power Management” on page 159 .
Going into Hibernation mode
If you are using the Windows ® XP Home operating system,
or are using the Windows ® XP Professional operating system
and are not a member of a domain, power off the computer
using the Hibernation command as follows:
1 Click Start, Turn off computer.
The Turn off computer window appears.
NOTE