Toshiba CS3910BH - Manual (Page 11)

10
D4134051A
(5) Multiple-shutter Mode Setting
Exposure is done during the one frame period which comes immediately after TRIG IN. Images are
output at the readout signal (E.VD) timing. If the exposure is made more than one time before the
readout signal input, superposed images are output. After video-output, it goes back into the normal
operation (= shutter OFF) if the TRIG terminal voltage stays in LOW for 2V or longer consecutively,
regardless of which RTS mode is currently set in.
-1 Fix mode
-1 Pulse mode
A+B
A B
20μs 20μs
Exposure-time
(Setting with TRIG pulse interval + approx 15 micros)
TRIG
CCD
(Exposure)
E.VD
VIDEO OUT
HD
WEN
VD
approx.5micros approx.5micros
Exposure-time
(Setting with TRIG pulse interval + approx 15 micros)
A+B
A
Exposure-time
(Setting with inner DIP SW)
TRIG
CCD
(Exposure)
E.VD
VIDEO OUT
HD
B
WEN
VD
approx.5micros
Exposure-time
(Setting with inner DIP SW)
approx.5micros