Teac USB Audio D/A Converter UD-H01 - Manual (Page 11)

11
USB cable
Playing back music files stored in the computer
1 Connect the unit to the computer using a USB
cable.
< Use a cable with a connector that fits the USB port on
the unit .
2 Turn the computer power ON.
< Confirm that the operating system has started properly .
3 Press the POWER button to turn the unit power ON.
4 Press the SOURCE button repeatedly to select
“USB”.
5 Start playback of the music file on the computer.
Even better sound quality can be achieved by setting
the volume on the computer to maximum and using
the amplifier connected to this unit to adjust the
volume .
Set the volume of the amplifier to the minimum at the
beginning of playback and gradually raise the level .
Continued on the next page