Teac USB Audio D/A Converter UD-H01 - Manual (Page 9)

9
Playback
1 Press the POWER button to turn the unit power
ON.
< If a power amplifier is connected, turn on the power
amplifier last .
2 Press the SOURCE button repeatedly to select a
source.
Each time the SOURCE button is pressed, the source
changes as follows:
COAXIAL (Coaxial digital input)
OPTICAL (Optical digital input)
USB (USB input for computers)
The input indicator of the selected source and the
indicator of the input sampling frequency light up .
< The input indicator blinks when the input signal is not
digital audio data or the format of the audio signal is
not compatible with this unit, such as Dolby Digital,
dts, or AAC . If this happens, set the digital OUT setting
of the connected device to PCM audio output .
< The frequency indicator blinks when there is no input
signal or the input signal cannot be locked .
< If the sampling frequency of the input signal is 32 kHz,
the frequency indicators do not light up, but the input
indicators do .
< To select "USB" to play back music files stored on a
computer, install dedicated TEAC driver software on
the computer before connecting the unit . (page 10)
3 Start playback on the connected source device,
and adjust the volume on the audio player.