Toro IMPACT 53721 - Manual

Universal
IMPACT
SPRINKLER-
45
Model 53721
Installing your Impact Sprinkler:
1. Dig out soil to a depth that
positions top of sprinkler at
ground level.
2. Connect water supply to either
bottom or side inlet.*
3. Seal unused inlet with plug
included.
4. Fill hole around sprinkler with
gravel, covered by layer of soil.
*In cold climates, protect sprinkler
from freeze damage by installing a
Toro Drain valve (sold separately,
Model 53740) to bottom inlet.
For new installations, avoid dry
spots and areas of over-watering by
spacing sprinklers so their spray
patterns overlap. Use the guidelines
in the accompanying chart and
position sprinklers as shown for
optimum coverage.
Space sprinklers for head-to-head coverage
Water
Pressure Spacing GPM Nozzle Pattern
30 PSI 32'
33'
35'
38'
39' 1.5
2.0
2.9
3.8
5.8 Orange
Red
Black
Blue
Green
1 /
4
1 /
3
1 /
2
3 /
4
Full
40 PSI 35'
37'
39'
41'
43' 1.8
2.2
3.6
4.2
6.5 Orange
Red
Black
Blue
Green
1 /
4
1 /
3
1 /
2
3 /
4
Full
50 PSI 36'
40'
41'
42'
45' 2.3
2.5
4.0
5.1
7.5 Orange
Red
Black
Blue
Green
1 /
4
1 /
3
1 /
2
3 / 4
Full
Performance and Nozzle Selection Chart
Match spray pattern to your layout
Adjust sprinkler to fit your layout by selecting
full or part circle spray patterns.
Full
Full Circle: Flip trip lever up
to allow sprinkler to rotate 360°.
Part Circle: Flip trip lever
down. Move adjuster collars
apart. The space between the
collars determines the arc of a
circle pattern the sprinkler will
water (20° to 340°).
Ensuring Even Coverage
To ensure that each area of your
lawn receives the same amount of
water (uniform coverage), install
the nozzle indicated in the
adjacent chart to correspond with
the full or part circle spray pattern
you have set. Toro nozzles feature
Matched Precipitation Rates to
allow sprinklers with different
patterns to be zoned together,
with each delivering matching
amounts of water.
Replacing Nozzles
1. Remove top cover.
2. Pull the rotor arm aside to
expose the nozzle.
3. Pull the nozzle tab toward you,
then push down to release the
nozzle.
4. Remove the nozzle and replace
with a new one.
5. Turn the nozzle tab clockwise
to lock the new nozzle in place.
Note: When using the orange or
red low-flow
nozzles, move
Adjustment
Spring to the B
position for best
functioning.
Reducing Spray Distance
To reduce the
spray distance
(radius) up to
25%, with the
sprinkler running,
turn the spray
reduction screw
clockwise into the stream,
counterclockwise to increase it again.
Maintenance & Troubleshooting
• Do not use oil, grease or pipe dope
on sprinkler.
• Check sprinkler nozzle for debris
• Check valve function
• Check timer function
Quarter Half
Trip lever Trip lever Trip lever
ASPERSOR DE IMPACTO UNIVERSAL-45
LEV
ANTE A
QUÍ P
ARA INSTR
UCCIONES
• Funcionamiento resistente a las obstrucciones
para instalaciones de agua sucia o de pozo
• Reemplaza con facilidad todos los demás
productos de impacto
5 boquillas codificadas por color para asegurar
una distribución uniforme del agua en todos
los patrones (de 30 gph preinstalada)
5 color-coded nozzles for even water
distribution across all patterns
(30 gph pre-installed)
• Clog-resistant performance for well
or dirty water installations
• Easily replaces all other impacts
© 2010 The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420
MADE IN CHINA
Label No. 118-1186
(800)367-8676
12,7mm
½"
side,
12,7 o 19,0mm
½"
or
¾"
bottom inlet
Completo o Ajustable
20°
to
360°
25'-45'Radius
7,6m-13,7m Radio
Full or Adjustable
Label size 13.0”w x 3.4375”h
A Visual Marketing
Design Office
TORO
Underground Packaging Program
JOB# 718.910 05Oct10
53721 Impact Sprinkler-45
Product Label Front
File: 53721_ImpactSprinkler-45Front_08.ai
PANTONE ®
584 C
PROCESS
CMYK