Texas Instruments XIO3130 EVM - Manual (Page 10)

Using WinROM to Configure the EEPROM www.ti.com
A new dialog box appears that allows the user to select which .dat file to use to program the EEPROM
(see
Figure 1-13 ). Select from one of the three operating modes supplied with the EVM.
Figure 1-13. Selecting a .dat File
After the Open button has been pressed, a new dialog box opens asking if the user is ready for WinROM
to begin flashing the EEPROM. After selecting yes, WinROM starts flashing the EEPROM with the
contents from the file (see
Figure 1-13 ). The .dat files are text documents that can be modified by the
user.
Figure 1-14. Flashing the EEPROM
10 XIO3130 EVM SLLU108 – July 2008
Submit Documentation Feedback