Topcom SMC-2000H - Manual (Page 7)

TOPCOM SMC-2000H 7
TOPCOM SMC-2000H
ENGLISH
XII Demo button
• Press this button to demonstrate the features of the massage cushion.
6 Technical data
7 Cleaning
• Disconnect the device and allow it to cool down.
• Clean it with a soft cloth or slightly damp sponge.
• Never allow that water or any other liquid enters the device or accessories.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
8 Storage
• Do not wrap the power cord around the unit before storing.
• Store the massage cushion in its original box and in a safe, dry and cool place.
• Store it out of the reach of children.
• Avoid contact with sharp edges or pointed objects as this might damage the fabric.
• You can use the transportation screw for locking the massage mechanism. Be careful to remove it
from the unit when switching it on again.
9 Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this product into the normal
household garbage but bring the product to a collection point for the recycling of electrical
and electronic equipments. The symbol on the product, user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling point. By re-
using some parts or raw materials from used products you make an important contribution
to the protection of the environment. Please contact your local authorities in case you need more
information on the collection points in your area.
Dimensions (W/H/D)
Weight
Power supply unit voltage:
– Input:
– Output:
680*145*470mm
4.5 Kg
100-240 V/AC/50-60 Hz
DC 12V/3A
There is a 15-minute auto shut off on the unit for your safety.
When the massager is switched off, the massage mechanism will always return to its
lowest position.
When selecting the seat vibration together with the back massage, there will be a
slight decrease of the vibration strenght. This adjustment is perfectly normal and
should not be interpreted as a defect.