TRENDnet TW100-BRM504 - Manual (Page 33)

Broadband ADSL Router User Guide
30
UpStream
Connection Speed Displays the speed for the UpStream Connection.
DSL Multiplexing
Method Indicates the current DSL Multiplexing method (LLC-Based or
VC-Based)
VPI Indicates the current VPI setting for the DSL connection
VCI Indicates the current VCI setting for the DSL connection
Internet
Connection Method Displays the current connection method.
Connection Status This indicates the current status of the Internet Connection.
• Active - Connection exists
• Idle - No current connection, but no error has been detected.
This condition normally arises when an idle connection is
automatically terminated.
• Failed - The connection was terminated abnormally. This
could be caused by Modem failure, or the loss of the connec-
tion to the ISP's server.
If there is an error, you can click the "Connection Details" button
to find out more information.
Internet IP Address This IP Address is allocated by the ISP (Internet Service Pro-
vider). If using a dynamic IP address, and no connection currently
exists, this information is unavailable.
Connection Details Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
LAN
IP Address The IP Address of the TW100-BRM504.
Network Mask The Network Mask (Subnet Mask) for the IP Address above.
DHCP Server This shows the status of the DHCP Server function. The value
will be "Enabled" or "Disabled".
MAC Address This shows the MAC Address for the TW100-BRM504, as seen
on the LAN interface.
System
Device Name The current name of the TW100-BRM504. This is also the
"hostname" provided to ISPs who request this information.
Firmware Version The version of the current firmware installed.
Buttons
Connection Details Click this button to open a sub-window and view a detailed
description of the current connection. Depending on the type of
connection, a "log" may also be available.
Attached Devices This will open a sub-window, showing all LAN devices currently
on the network.
Refresh Screen Update the data displayed on screen.