Static routing - example – TRENDnet TW100-BRM504 User Manual

Page 67

Advertising
background image

Broadband ADSL Router User Guide

64

Destination IP Address

Normally 0.0.0.0, but check your router documentation.

Network Mask

Normally 0.0.0.0, but check your router documentation.

Gateway IP Address

The IP Address of the TW100-BRM504.

Metric

1

Other Routers on the Local LAN

Other routers on the local LAN must use the TW100-BRM504's Local Router as the Default
Route
. The entries will be the same as the TW100-BRM504's local router, with the exception
of the Gateway IP Address.
• For a router with a direct connection to the TW100-BRM504's local Router, the Gateway

IP Address is the address of the TW100-BRM504's local router.

• For routers which must forward packets to another router before reaching the TW100-

BRM504's local router, the Gateway IP Address is the address of the intermediate router.

Static Routing - Example

Figure 45: Routing Example

For the TW100-BRM504's Routing Table

For the LAN shown above, with 2 routers and 3 LAN segments, the TW100-BRM504 requires
2 entries as follows.

Entry 1 (Segment 1)
Destination IP Address

192.168.1.0

Network Mask

255.255.255.0 (Standard Class C)

Gateway IP Address

192.168.0.100 (TW100-BRM504's local
Router)

Metric 2

Advertising