Topcom BABYTALKER 2500 User Manual
Page 9
9
ENGLISH
Topcom Babytalker 2500
5.7.2 Temperature alert
When the temperature limits are exceeded, a double beeptone can alert you.
•
Press
(8) on the parent unit, ‘Night Light’ is displayed.
•
Press
(11) until ‘Temperature’ is displayed.
•
Press
(4).
•
Press
(11) until ‘Temp Alert’ is displayed.
•
Press
(4).
‘On?’ is displayed.
•
Press
(4) to activate the temperature alert.
•
Press
(11) or
(10) to select the desired volume.
•
Press
(4) to confirm.
•
Press
(8) to leave the menu.
To deactivate the alert, follow the same instructions, but select ‘Off?’.
5.7.3 Temperature unit (°C or °F)
•
Press
(8) on the parent unit, ‘Night Light’ is displayed.
•
Press
(11) until ‘Temperature’ is displayed.
•
Press
(4).
•
Press
(11) until ‘Degree F?’ is displayed.
•
Press
(4) to confirm.
•
Press
(8) to leave the range setting.
To set the unit to °C, follow the same instructions, but select ‘Degree C?’.
5.8
VOX sensitivity
The level of the voice detection (VOX) sensitivity from the Baby Monitor can be changed. If
the baby is a quiet sleeper, the sensitivity level can be increased so that minor disturbance
can be detected and transmitted to the parent unit.
•
Press
(8) on the parent unit, ‘Night Light’ is displayed.
•
Press
(11) until ‘Sensitivity’ is displayed.
•
Press
(4) to confirm.
•
Press
(11) or
(10) to select the desired VOX sensitivity.
•
Press
(4) to confim.
•
Press
(8) to leave the menu.