Toshiba 2400 - Manual (Page 171)

171 Exploring Your Options
Exchanging data with another computer
5.375 x 8.375 ver 2.4.0
Accessing a network
To access:
❖ A wired network at the office, connect an Ethernet cable
to the RJ45 jack on your computer.
❖ A remote network, you need a dial-up connection.
❖ A wireless network, you need a wireless networking PC
Card, or contact your authorized Toshiba representative.
Setting up a dial-up connection
To set up a dial-up connection, use the New Connection
Wizard:
1 Click Start and point to All Programs.
2 Point to Accessories, then to Communications, and
click New Connection Wizard.
3 Follow the on-screen instructions.
The computer connects to the network.
Setting up a wireless connection
For information on how to set up a wireless connection, refer
to your wireless networking device documentation.
Accessing the wireless modules using your system tray
This information applies to systems with the optional Wi-Fi
feature.
NOTE: To install the Wi-Fi option at a later time, contact your
Toshiba authorized service provider.
When using your Wi-Fi Mini PCI module, your computer
may display a PC Card icon in the desktop’s system tray to
indicate that it is in use. Do not confuse the system tray’s icon