Topfield FREE TO AIR TF3100FEP PRO - Manual (Page 45)

M
E
NU
OP
ERA
T
IO
NS
IV-4 . Motorized DiSEqC 1.2
If you have DiSEqC 1.2 motorised system, then you can use the DiSEqC 1.2 functions.
. Satellite Name
A selection of satellite names that will be used to identify a motor position.
. Frequency: Selects the frequency to catch the strong signal.
. DiSEqC Command Mode : Change the current mode between U s e r and I n s t a l l e r
modes.
- U s e r: This mode is used to fine-tune the position of the motor for better reception.
- I n s t a l l e r: This mode is used to search for the position of a satellite manually.
. Movement: In case of U s e r mode, the movement is adjustable by fine-tuning.
In case of I n s t a l l e r mode, the movement is adjustable by E a s t, W e s t going
command.
MENU OPERATIONS