Toshiba TEC B-419-GS10-QQ - Manual (Page 27)

2. PRINTER SETUP EO1-33030
2.10 Program Download
2- 17
2.10.2 Install Program
Installation (Cont.)
2.10.3 Firmware Files Copy
12. When the install process is completed, the following screen display
will appear. Click on the Finish button to end the installation.
If it ever becomes necessary to upgrade the firmware in the B-419 printer
you will be supplied with a floppy disk containing the latest firmware
revision similar to that shown below.
•
Copy Firmware Files to Hard Disk
The files contained on the Firmware FDK are self-decompressing files.
They must be copied to the following directories of the PC hard disk
before being transferred to the printer. When the “Install Program for B-
419” was installed onto your PC, it created the following directories:
C:\Program Files\TOSHIBATEC\B419STDDL\Firmware
Using Windows Explorer, copy all the files from the Firmware FDK to
the above directory and decompress them into binary files (*.BIN).
B-419 Standard
FIRMWARE V1.0
15th June 2001
FMRM0064101:7200(F800)
(FONT:0200)(KANJI:C900)
V001.000
Copyright ©2001
TOSHIBA TEC CORPORATION
All Rights Reserved
FILE:S-V10-Z900.EXE
(PROGRAM: S-P-V10-72.BIN)
(FONT:S-C-V10-02.BIN)
(KANJI: S-K-V10-C9.BIN)
NOTE:
If the Install Program for B-
419 has not been installed on
your PC yet, refer to Section
2.10.2 Install Program
Installation and install it
before copying the firmware.