Texas Instruments Serial Programming Adapter MSP430 - Manual (Page 28)

PRGS430.DLL—Description
2-16
/FN0009/ EraseCheckFile
long int EraseCheckFile(char* lpszFileName, long int iFileType)
This function checks if all memory addresses, which are in the file, are erased.
lpszFilName: Name of the file
iFileType:
FILETYPE_AUTO (0x00) − autodetection of file type (Intel-hex or
TI-TXT)
FILETYPE_TI_TXT (0x01) − file type is TI-TXT
FILETYPE_INTEL_HEX(0x02) − file type is Intel-hex
Function returns success or first address with mismatching data.
Example:
lFuncReturn = EraseCheckFile(”test.txt”, long:0)
/FN00010/ PatternCheck
long int PatternCheck(long int wStart, long int wLength, long int wPattern)
Checks a memory range with word pattern passed
wStart: Start address of the memory area. Allowed values : 0x0000−0xFFFE
(see memory map of the corresponding device)
wLength: Size of the area. Allowed values : 0x0000−0xFFFE (see memory
map of the corresponding device)
wPattern: Word pattern for check
Function returns success or first address with mismatching data.
Example: lFuncReturn = PatternCheck(long:0xF000,
long:0x1000, long:0xFFFF)
/FN00011/ VerifyData
long int VerifyData(long int wStart, long int wLength, void* lpData)
This function verifies the content of the device with the data stored at passed
pointer to data.
wStart: Start address of memory area. Allowed values : 0x0000−0xFFFE (see
memory map of the corresponding device)
wLength: Length of the memory area to be checked. Allowed values :
0x0000−0xFFFE (see memory map of the corresponding device)
lpData: Pointer to buffer with data bytes in it
Function returns success or first address with mismatching data.
Example:
lFuncReturn = VerifyData(long:0xF000, long:0x1000, void* lpData)