Tekxon Technology K3 - Manual (Page 11)

9
4 Basic operation
4.1 Switching the camera on and off
Switching the camera on
Press the On/Off button for 1-
2 seconds to switch the
camera on. If the camera is
not switched on, check the
polarity of the batteries
and ensure that they are
charged.
Switching the camera off
Press and hold the main
switch for several seconds to
switch
the cameral off. The LCD
goes blank.
If the camera is idle for more than three minutes, it is switched off
automatically to save battery power. Press the On/Off button for 1-2
seconds to switch the camera on again.
Automatic deactivation is not active in USB or record mode.
On/off button