Tekxon Technology K3 - Manual (Page 30)

28
5.14 Setting the LOGO
The LOGO is the startup image which is shown on the display when the camera is activated.
This allows the user to define individual images. To do so, proceed as follows:
1
Press the button to start playback mode. Open the required photo Press the menu
button and select the “Set Logo” item.
2
After setting the logo, select the option “Play Logo” in the playback mode menu. There
are two options:
• Enable: The image selected by the user is used as the startup image.
• Disable: The preset image is the startup image.
The startup image is not deleted when images are deleted or the memory
is formatted. To set another startup image, you must repeat the
procedure described above.