Technicolor - Thomson DTH8657E - Manual (Page 36)

34
Menus
System Options
The System Options menu in the Setup menu offers you settings to configure certain useful
functions and optimise the performances of your DVD recorder to match those of the devices
connected to it.
DivX
Selecting DivX displays the authorisation number for the videos you have purchased over the
Internet (VOD:Video On Demand).
Digital output (audio)
Depending on the amplifier or television (with or without integrated decoder) connected to your
DVD recorder, you will need to set the DIGITAL AUDIO OUT sockets (coaxial) so that they
deliver the Dolby Digital, DTS or MPEG digital signals supported by the other device.Tick Dolby
Digital or DTS if the amplifier or TV set has a Dolby Digital or DTS decoder (or both,
depending on devices). MPEG must be ticked to play a DVD disc on which the sound was
recorded using MPEG standard.
Standby mode
Your DVD recorder has an Eco Standby to reduce its power consumption when on stand-by.
Select Eco. Standby to enable this function.
Note: the E Eccoo function does not allow the display of programming warning messages on the display panel.
Only the record icon will flash.
Settings
Information relating to TV programmes in the Naviclick guide is transmitted by certain channels.
Update
Programmes are updated at 3am or 8am.
The line Update Time is already selected, press OK .
Select 3 am or 8 am and confirm.
Note: For those countries offering the NexTView service we recommend that you set the downloading time
to 3am. For all other countries set it to 8am.
MENU Setup OK System Options OK
MENU Setup OK Installation OK Naviclick
02_DTH8657_en.qxp 10/05/06 14:13 Page 34