TRENDnet TEW-435BRM - Manual (Page 30)

PC Configuration
27
Figure 20: TCP/IP Properties (Win 2000)
5. Ensure your TCP/IP settings are correct, as described below.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows setting. Using this is recommended. By default, the TEW-435BRM will act as a
DHCP Server.
Restart your PC to ensure it obtains an IP Address from the TEW-435BRM.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the
following changes.
• Enter the TEW-435BRM's IP address in the Default gateway field and click OK. (Your
LAN administrator can advise you of the IP Address they assigned to the TEW-435BRM.)
• If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.