TRENDnet TEW-435BRM - Manual (Page 9)

6
Chapter 2
Installation
This Chapter covers the physical installation of the TEW-435BRM.
Requirements
• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
• TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP, and a DSL connection.
• To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE
802.11g or IEEE 802.11b specifications.
Procedure
Figure 4: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the TEW-435BRM.
For best Wireless reception and performance, the TEW-
435BRM should be positioned in a central location with
minimum obstructions between the TEW-435BRM and the
PCs.
Also, if using multiple Access Points, adjacent Access
Points should use different Channels.
2