Turbosound LMS-D4 - Manual (Page 13)

user manual
LMS-D4
LMS-D4 user manual
Page 13
3. Scroll to set the nearest lower voltage to the calculated value in the limiter screen for that
loudspeaker model (or frequency band as appropriate), and press ENTER. Refer to the
limiter voltage lookup table in Appendix A for a range of approximate conversion values.
In addition to those values, the limiters can also be defeated (OFF displayed on the screen). Please
note that this setting should be used only if the amplifiers already have internal limiters or soft
clipping circuitry.
5) Channel Gain
Set the gain of the specified output channel relative to the other channel(s). Available values are
from +6.0 to –19.4 dB, in 0.2 dB steps. Note: with limiters and amplifier gain set correctly, 0dB
relative gain will give maximum output.
6) Polarity
Define the polarity of the specified output channel. The value can be normal or inverted.
7) Delay
OP1+3 Sub
Polarity = Normal
OP1+3 Sub
Delay = 0.000 ms
OP1+3 Sub
Gain = 4.0 dB