Turbosound LMS-D4 - Manual (Page 3)

user manual
LMS-D4
LMS-D4 user manual
Page 3
An example of this equipment has been tested and found to comply with the
following European and international Standards for Electromagnetic
Compatibility and Electrical Safety:
Conducted and Absorbed Emissions (EU): EN55103 (1996)
Harmonic Current Emisions (EU): EN61000-3-2
Voltage Fluctuations/Flicker (EU): EN61000-3-3
Generic Immunity (EU): EN50082-1 (1997)
Electrical Safety (EU): EN60065 (1998)
Electrical Safety (US): UL6500 (2000)
Electrical Safety (Canada): CSA E6500 (1999)
Important Safety Information
Please read carefully and keep the following instructions and safety information.
Heed all warnings and follow all instructions.
• Do not remove covers. There are no user serviceable parts inside, please refer
servicing to qualified service personnel. This equipment must be earthed.
• Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Servicing is required when the apparatus has been damaged in any way, such as
the power supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO RAIN OR MOISTURE
ATTENTION
RISQUE DE CHOC ELECTRIQUE
NE PAS ENLEVER
NE PAS EXPOSER A LA PLUIE NI A L’HUMIDITE