Tally Genicom Tally Mono Laser T9220 - Manual (Page 73)

U SING P RINT M ATERIALS 4.10
3
Prepare a stack of paper, or other media, for loading by
flexing or fanning them back and forth. Straighten the
edges on a level surface.
4
Place paper/media on the centre of the tray with the print
side face up.
If you want to print on previously printed paper from the
Multi-Purpose Tray, the printed side should be facing down
with an uncurled edge to the printer. If you experience
problems with paper feed, turn the paper around.
N OTE :
Make sure that you have not overloaded the tray.