Toshiba DKT2104-CT - Manual (Page 56)

Features
Auto Redial
44
Strata DKT2104-CT Cordless Digital Telephone 5/00
Cancel Auto Callback and Line Queuing
➤ Press a [DN] +

+
WDON
.
Auto Redial
This feature enables you to automatically redial the last number (outside or [DN])
called by pressing
5HGLDO . 5HGLDO must be programmed as one of the four flexible
buttons on the telephone.
Call Forward
You can set your handset [DN] with a variety of CF modes. CF must be set before the
call is received. When it is set, the following types of calls are forwarded.
♦ External calls, but not lines that ring more than one station, except CF-External.
♦ Transferred line calls.
♦ Internal calls, except Handsfree, OCA, and CF-External.
Note CF has priority over the Station Hunt feature.
You hear CO dial tone. If you hear a busy tone, the
line has received another call. Your request is not
cancelled.
You are recalled when the line becomes available. The
Line or [DN] LED lights steady.
1. Press an available
[DN] or
/LQH
.
Make sure that you press the same [DN] or /LQH that
you used to dial the telephone number that you wish to
redial. You hear dial tone.
2. Press 5HGLDO . The last telephone number you dialed is automatically
redialed.