Toshiba IK-TF9U User Manual
Page 17
17
-- SHUTTER --
MODE
E.TRG
E.TRG
PW SNR
TRG.P
PART
OFF
<MODE = E.TRG E.TRG = PW SNR>
• Partial scanning switch
OFF/25fps/30fps/35fps/40fps/45fps/50fps/
E25fps/E30fps/E35fps/E40fps/E45fps/E50fps
Input trigger pulse : positive polarity
Input trigger pulse : negative polarity
• E.TRG mode
1P SNR, 1P SR, PW SNR, PW SR, RR
• Input trigger pulse setting at PW SNR and PW SR
• Sutter mode MANU, SS, E.TRG
Move up down
By pushing
MENU UP, DOWN
Set by pushing
DATA UP, DOWN
(1. 3. 3)
Changing each setting in PW SNR mode
(a) Changing the polarity of inputting trigger pulse setting
1
Set the "
→
" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.
2
Select either
,
by pushing [DATA UP], [DATA DOWN] buttons.
(b) Changing the partial scanning setting
1
Set the "
→
" to PART by pushing [MENU UP], [MENU DOWN] buttons.
2
Select the mode by pushing [DATA UP], [DATA DOWN] buttons.
Note:
The longer the storage time with extended exposures, the more visible certain characteristics of CCD
cameras become: fixed pattern noise, white pixels, etc.