Transition Networks N-FX-ST-01 - Manual (Page 13)

NOVELL NETWARE 4.X/ 5.X - SOFTWARE UPGRADE/ADDING
NETWORK CARD TO AN EXISTING SYSTEM.
1. Shutdown Netware Server and power-off the machine.
2. Install the Transiton / LANart (EFA020X series) Adapter card in accordance with your
personal computer user's manual. Again, follow all handling procedures to avoid electro-
static discharges.
3. On the server’s prompt , type:
LOAD INSTALL
for 4.x
Type:
NWCONFIG
for 5.X
4. Choose - "Driver Option"
5. Select - Configure Network driver"
6. Select "Load a Driver"
7. Press Insert (Ins)
8. Press <F3>
9. Insert Transition Disk in the drive
10. Type at the A prompt -
\Novell\nwsrvr41 for Novell4.X and \Novell\Nwsrvr5
11. Choose the appropriate Transition / LANart ( EFA020X) driver and proceed to configure
the adapter
12. Save and Load the driver
13. See your Network Administrator for the proper network numbers and continue with the
installation.
13