Transition Networks N-FX-ST-01 - Manual (Page 9)

MICROSOFT WINDOWS 98 - SOFTWARE UPGRADE
1. Power up the computer and start Windows 98.
2. Update the driver for the PCI card - open the control panel by clicking "Start," then
"Settings," then "Control Panel."
3. Double Click "system"
4. Click "Device Manager"
5. Double Click "Network Adapter"
6. Highlight "LANart…." and Click on "Properties"
7. Click on "Driver" and Click on "Update Driver"
8. Click on "Next" and choose - "No, Select Driver from List."
9. Click "Next" and Highlight the Adapter
10. Click "Have Disk"
11. For the NDIS3 MAC driver, type at the prompt:
"A:\Win98\Ndis3\Mac" and click "OK."
For the NDIS4 MINIPORT driver, type at the prompt:
"A:\Win98\Ndis4\Mini" and click "OK."
12. Click "OK"
13. Click "Next" and Click "Finish"
14. Click "Yes" to restart the computer.
15. When the system comes up, open the control panel by clicking "Start," then "Settings,"
then "Control Panel."
16. Double Click "system"
17. Click "Device Manager"
18. Double Click "Network Adapter"
19. Highlight " …." And , Click on "Properties"
20. Click on Advance
21. Chose the properties as required by the Network Administrator
22. Restart the computer. Your adapter is now configured. To access your network, protocols
will need to be configured. Please see your network administrator for details.
9