1 hardware specifications, Router, Physical interfaces – Technicolor - Thomson 605 User Manual
Page 15: Leds, Reset button, Association button, Wireless performance, Memory and cpu, Cardbus, Power requirement
Chapter 1
Your SpeedTouch™
E-DOC-CTC-20050429-0104 v1.0
5
1.1.1 Hardware Specifications
Router
Integrated multi-mode ADSL modem, supporting:
ADSL over POTS for a SpeedTouch™ ADSL/POTS variant)
ADSL over ISDN for a SpeedTouch™ ADSL/ISDN variant)
ADSL/RE-ADLS2/ADSL2/ADSL2+ for both ADSL over POTS and ADSL over
ISDN
Physical interfaces
WAN:
One RJ-11 port for ADSL/POTS or ADSL/ISDN connection
Integrated ISDN Modem S
0
interface (in case of a SpeedTouch™608 WL/
620)
LAN:
Four RJ-45 ports for managed 10/100Base-T Half-/Full-duplex auto-
sensing MDI/MDI-X Ethernet switch
Wireless LAN: IEEE 802.11b/g Wi-Fi compliant access point on the
SpeedTouch™608 WL/620
LEDs
LED indicators for all interfaces
Reset button
One programmable recessed reset button for restoring the factory default settings
Association button
One push button for wireless association and registration on the
SpeedTouch™608 WL/620
Wireless performance
On the SpeedTouch™608 WL/620:
Typical indoor coverage: 60m
Dynamic rate switching
Manual / Automatic channel selection
Manual / Automatic selection of pure 802.11g, pure 802.11b or mixed mode
(802.11b/g) network
Wireless Distribution System (WDS)
WPA-PSK / WEP data encryption
Memory and CPU
16 MB flash
32 MB SDRAM
Memory and processor load counters
Cardbus
On SpeedTouch™608 WL/620:
PCMCIA/CardBus plug-in slot for future extension: IPSec acceleration card,
PSTN back-up card, GPRS back-up card, ..
Power requirement
Power supply: 18V AC, 1000mA with patent-pending power-cord lock to avoid
accidental power plug-out