Transition Networks CSRFB10XX-100 - Manual (Page 7)

12
CSRFB10xx-100
24-hour Technical Support: 1-200-260-1312 -- International: 00-1-952-941-7600
Technical Specifications
For use with Transition Networks Model CSRFB10xx-100 or equivalent.
Standards IEEE 802.3™
Data Rate: 10 Mbps, 100 Mbps
Dimensions 3.4" x 5" x 1" (86 mm x 127 mm x 25.4 mm)
Weight 4 oz. (114 g approximate)
Power Consumption: 3.0 W
MTBF 280,232 MIL-HDBK-217F Hours
770,637 Bellcore Hours
Packet Size: Unicast MAC address: 1K
Maximum packet size:
- 1916 bytes untagged bytes
- 1912 bytes tagged bytes
Environment Tmra*: 0 to 50°C (32 to 122°F )
Storage Temp: -25 to 65°C (-13 to 149°F )
Humidity 5 to 95%, non condensing
Warranty Lifetime
*Manufacturer’s rated ambient temperature: Tmra range for this slide-in-module
depends on the physical characteristics and the installation configuration of the
Transition Networks PointSystem™ chassis in which this slide-in-module will be
installed.
The information in this user’s guide is subject to change. For the most up-to-date
information on the CSRFB10xx-100 media converter, view the user’s guide on-line at:
www.transition.com.
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR,
Subchapter J applicable at the date of manufacture.
CAUTION: Visible and invisible laser radiation when open. Do not stare into beam
or view directly with optical instruments.
CAUTION: Use of controls, adjustments or the performance of procedures other than
those specified herein may result in hazardous radiation exposure.
The fiber optic transmitters on this converter meet Class I Laser safety requirements
per IEC-825/CDRH standards and comply with 21 CFR1040.10 and 21CFR1040.11.
[email protected] -- Click the “Transition Now” link for a live Web chat. 13
Troubleshooting
If the media converter fails, isolate and correct the failure by determining the answers
to the following questions and then taking the indicated action:
1. Is the PWR (power) LED illuminated?
NO
• Is the media converter inserted properly into the chassis?
• Is the power cord properly installed in the chassis and at the external
power source and does the external power source provide power?
• Contact Technical Support: US/Canada: 1-800-260-1312, International:
00-1-952-941-7600.
YES
• Proceed to step 2.
2. Is the Link/Activity (twisted-pair link) LED illuminated?
NO
• Check the copper cables for proper connection and pin assignment.
• Contact Technical Support: US/Canada: 1-800-260-1312, International:
00-1-952-941-7600.
YES
• Proceed to step 3.
3. Is the LACT (fiber-pair link) LED illuminated?
NO
• Check the fiber cables for proper connection.
• Verify that the TX and RX cables are connected to the RX and TX ports,
respectively, on the 100Base-FX converter.
• Contact Technical Support: US/Canada: 1-800-260-1312, International:
00-1-952-941-7600.
YES
• Proceed to step 4.
4. Is the Speed (twisted-pair speed) LED illuminated?
NO
• Check the copper cables for proper connection.
• Off = The media converter has selected 10Mbps operation.
• If the speed is not correct, disconnect and reconnect the twisted pair cable
to restart the initialization process.
• Contact Technical Support: US/Canada: 1-800-260-1312, International:
00-1-952-941-7600.
YES
• On = The media converter has selected 100Mbps operation.
• If the speed is not correct, disconnect and reconnect the twisted pair cable
to restart the initialization process.
• Contact Technical Support: US/Canada: 1-800-260-1312, International:
00-1-952-941-7600.