Toshiba B-850 - Manual (Page 86)

APPENDIX 4 SYSTEM MODE EO1-33029
A4.4 Printer Parameter Fine Adjustment
A4-10
A4.4 Printer Parameter
Fine Adjustment
(Cont.)
Print Tone Fine Adjustment (Thermal Transfer/Thermal Direct
Print)
With this parameter you can fine adjust the Print Tone. When
“<3>ADJUST SET” appears, press the
[PAUSE] key 5 times to enter
the Print Tone Fine Adjustment (Thermal transfer print) menu.
To change the screen to the Print Tone Fine Adjustment (Thermal direct
print), press the
[PAUSE] key again.
[FEED] key: Pressing the [FEED] key one time causes a –1 tone change,
up to –10 tones.
[RESTART] key: Pressing the [RESTART] key one time causes a +1
tone change, up to +10 tones.
After completing the fine adjustment, press the [PAUSE] key.
NOTES:
•
The fine adjustment value
equals the sum of the fine
adjustment values set by the
PC command and this
parameter. The maximum
print tone fine adjustment
value is
±
10 (Thermal
Transfer Print) or +7 and –10
(Thermal Direct Print). When
the value reaches the
maximum, the value remains
unchanged even if the
subsequent fine adjustment is
performed.
•
This is useful when print tone
is required to be fine adjusted
e.g.) When the ribbon is
changed to different type.
721($'- '!
[RESTART]
[FEED]
721($'- 7!
721($'- 7! 
721($'- 7!
721($'- 7! 
721($'- 7!
721($'- 7!
721($'- '!
721($'- '! 
721($'- '!
721($'- '! 
721($'- '!
Darker
Lighter
Standard
Thermal Transfer Print Thermal Direct Print
Thermal Transfer
Thermal Direct