Tyan Computer TIGER S5350 - Manual (Page 26)

Tiger i7320 S5350 Chapter 2: Board Installation
2-19
http://www.tyan.com
2.9 Installing Optional SO-DIMM modules
Your Tiger i7320 (S5350) motherboard may be equipped with an optional proprietary SO-
DIMM connector. The SO-DIMM connector can be used for expansion cards to provide such
features as, additional SATA or SCSI support. For details of available expansions cards, visit
the TYAN website at
http://www.tyan.com . To install a SO-DIMM expansion card:
1. Open the spring levers as shown.
2. Insert the SO-DIMM card as shown, making sure that
the card is the right way up. The card will fit in only
one way and the screw holes in the card should line
up exactly with the mounting posts on the
motherboard.
3. Push the SO-DIMM card down into place and make
sure the spring levers click into place as shown.
4. Screw the board into place using one or two screws
as required.
Removal of a SO-DIMM card is a reversal of the installation
procedure. Push out the spring levers as shown and pull the card out of the socket.
The SO-DIMM expansion cards will fit in the slot only one way. Make sure that you align the
slot in the card with the key in the card slot.