Tyan Computer Transport GT20 B5161 - Manual (Page 74)

66
4. a: Inset the cable into the rear of HDD tray. b: Connect
the cable to M3290. c: Insert and secure HDD tray.
5. Arrange and connect the cable to SMDC connector on
mainboard. Be careful not to block the air flow.
Installing M3290/M3291 into GT24 Chassis
NOTE: The products produced now may not support the pro-
cedures below. We’ll provide you with the upgraded models
as soon as possible.
1. Disconnect the power connectors on HDD backplane and
M1010.
2. Push the power cables aside.