Owner’s manual – Tanaka POLE EDGERS TPE-25OPF User Manual
Page 11
www.tanaka-usa.com
Owner’s Manual
TPE-2501,TPE-2510,TPE-270PF/PN,TPE-250PF
Maintenance schedule
Below you will find some general maintenance instructions.
For further information please contact your service dealer.
Daily maintenance
•
Clean the exterior of the unit.
•
Check the blade guard for damage or cracks. Change the guard in case of impacts or cracks.
•
Check that the cutting attachment is properly centered, sharp, and without cracks. As off-centered
cutting attachment induces heavy vibrations that may damage the unit.
•
Check that the cutting attachment nut is sufficiently tightened.
•
Check that nuts and screws are sufficiently tightened.
Weekly maintenance
•
Check the starter, especially cord and return spring.
•
Clean the exterior of the spark plug.
•
Remove it and check the electrode gap. Adjust it to 0.6 mm, or change the spark plug.
•
Clean the cooling fins on the cylinder and make sure the air intake at the starter is not clogged.
•
Check that the angle gear is filled with grease up to ¾.
•
Clean the air filter.
Monthly maintenance
•
Rinse the fuel tank with gasoline.
•
Clean the exterior of the carburetor and the space around it.
•
Clean the fan and the space around it.