Toshiba B-450-QQ Series - Manual (Page 18)

8-4
EO1-33006
8. LOADING THE PAPER
8. LOADING THE PAPER
Strip type:
1 Strip the labels from the backing paper for about 200-mm long from the top edge of the label roll.
2 First push the strip lever toward the printer to release the hook, and then pull the strip lever.
3 Pass the backing paper between the strip roller and the strip guide roller. After taking up any slack of
the paper, set the strip lever in position.
Fig. 8-10
Strip Lever
Strip Guide Roller
Backing Paper