Toshiba B-450-QQ Series - Manual (Page 8)

2-2
2. SPECIFICATIONS EO1-33006
2.3 PAPER (LABEL/TAG) SPECIFICATIONS
2.3 PAPER (LABEL/TAG) SPECIFICATIONS
NOTES: 1. To ensure good print quality and maximum print head life use only TOSHIBA TEC specified paper and
ribbons.
2. For further information about paper and ribbon, refer to Section 10. CARE/HANDLING OF THE PAPER
AND RIBBON.
2.4
2.5 OPTION
[Unit: mm]
Span of one label/tag
Label length
Width including backing paper
Label width
Gap length
Black mark length (Tag paper)
Effective print width
Effective print length
Print speed up/slow down area
Black mark length (Label)
Outer roll diameter
Thickness
25.4 ~ 999.0
23.4 ~ 997.0
25.4 ~ 114.0
22.4 ~ 111.0
2.0 ~ 20.0
2.0 ~ 20.0
10.0 ~ 105.7
15.0 ~ 500.0
15.0 ~ 500.0
1.0
MIN. 2.0
MAX. ø152.4 (Paper Core ø38, 40, 42 or 76.2)
0.13 ~ 0.17 0.1 ~ 0.17 0.1 ~ 0.17
Label dispensing mode
Item
Batch mode Strip mode Cut mode
2.0 ~ 20.0 6.0 ~ 20.0
Label
Tag
15.0 ~ 999.0
13.0 ~ 997.0
Label: 37.0 ~ 999.0
Tag: 25.4 ~ 999.0
31.0 ~ 993.0
Type Spool type
Width 60 mm ~ 110 mm
Length (300 m)
Outer diameter Ø65 mm (max.)
Use
This cutter module uses a rotary cutter. It cuts backing
paper of labels and tag paper automatically in "stop and
cut" mode.
This strip module strips the label from the backing paper
with the take-up block and strip block. When the
rewinder guide plate is attached, the tag paper and label
with backing paper are wound.
This module is an external intelligent keyboard unit.
Installing this board in the printer allows a connection with
an external device with the exclusive interface, such as
the Keyboard module.
Installing this board in the printer allows a connection with
a PC by the Centronics parallel interface.
This board enables the printer to be used in a LAN
network by using the command language.
Option Name
Cutter module
Strip module
Programmable
Keyboard
module
Expansion I/O
interface board
Centronics
interface board
LAN I/F Board
(TS model only)
Type
B-7204-QM
B-7904-H-QM
KB-80-QM
B-7704-IO-QM
B-7704-C-QM
B-7704-LAN-
QM
NOTE: To purchase the OPTIONAL KIT, please contact your authorized TOSHIBA TEC represen-
tative or TOSHIBA TEC Head Quarter.
RIBBON SPECIFICATIONS