Tekram Technology M205 - Manual (Page 12)

Page 12 M205 PRO User’s Manual
SOFTWARE INSTALLATION
n n Installing the Windows 95 Device Drivers
After the capture card is properly installed in the system, power on your system.
Windows 95 will automatically detect the card as a Multimedia Device upon boot-up,
and display a “New Hardware Found” screen like the one shown below. Click on
“Driver Disk from Manufacturer”, insert the Tekram Multimedia Drivers & Utilities
CD into your floppy drive, specify the path D:\M205_PRO (D: is your CD-ROM
drive) and follow the on-screen instructions to install the drivers for the capture card.
After the required files are copied, the system will ask if you wish to restart your
computer. Select YES to restart.
Note: The Windows 95 setup screen on your system may look different than the one
shown above if you have OSR2 / Windows 95 (B) installed.
n n n n n n 3