Tekram Technology M205 - Manual (Page 8)

HARDWARE INSTALLATION
Page 8 M205 PRO User’s Manual
n n Hardware Installation
Installing the Capture Card
Important: Handle circuit boards by the edges or bracket. Touch the bare metal of
your computer case before handling any circuit boards to prevent static discharge
damage.
1. Turn OFF all power to your system, including any peripherals (printer, external
drives, modem, etc.).
2. Disconnect the power cord and the monitor cable from the back of the computer.
3. Remove the computer cover. Refer to your system user’s manual for instructions.
4. Align the gold-fingered edge on your card with an empty PCI expansion slot and
gently insert it into place. You may need to remove the cover from the rear of the
PCI expansion slot that you selected.
5. Replace the screws to secure the card retaining bracket in place.
6. Replace the computer cover.
Connectors and Jumpers on the M205 PRO Card
Refer to the diagram below while making the connections that follow.
External Connectors Internal Connectors and Jumpers