Tyco Electronics ET 1900L - Manual (Page 24)

Elo TouchSystems 1900L User Guide 24
APPENDIX
A
TOUCHMONITOR SAFETY
This manual contains information that is important for the proper
setup and maintenance of your touchmonitor. Before setting up and
powering on your touchmonitor, read through this manual, especially
Chapter 2 (Installation and Setup), and Chapter 3 (Operation).
1 To reduce the risk of electric shock, follow all safety notices and
never open the touchmonitor case.
2 Turn off the product before cleaning. (Please refer to Care and
Handling of Your Touchmonitor on the following page for proper
cleaning methods.)
3 Your touchmonitor is equipped with a 3-wire, grounding
power cord. The power cord plug only fits into a grounded
outlet. Do not attempt to fit the plug into an outlet that has not
been configured for this purpose. Do not use a damaged power
cord. Only use the power cord that comes with your Elo
TouchSystems Touchmonitor. Use of an unauthorized power
cord may invalidate your warranty.
4 The slots located on the sides and top of the touchmonitor case
are for ventilation. Do not block or insert anything inside the venti-
lation slots.
5 It is important that your touchmonitor remains dry. Do not pour
liquid into or onto your touchmonitor. If your touchmonitor be-
comes wet do not attempt to repair it yourself.