Texas Instruments TVP5154EVM - Manual (Page 22)

www.ti.com
8.5.2.4 Memory Map Editor
WinVCC in Depth
The DM642 I 2 C registers can be edited using I 2 C sub-address 0x40. See Section 9 for details about the
DM642 registers.
The video encoder module registers can be edited using I 2 C sub-address 0x54 (default) or 0x56 if the
alternate slave address is being used.
Figure 18. Generic I 2 C Register Map Editor
The memory map editor (see Figure 19 ) allows the display and editing of the data memory and hardware
registers of the device, such as the scaler setting registers.
To open this, click on Memory Map in the Edit menu and click on the device type to edit. The operation of
the memory map editor controls are explained in
Table 5 .
Figure 19. Memory Map Editor
22 TVP5154EVM User's Guide SLEU069A – February 2006 – Revised July 2006
Submit Documentation Feedback