Toshiba A300 - Manual (Page 134)

7-6 User’s Manual
A300/A300D
There are two modes, Mode 1 and Mode 2 in [Enabled]. For normal use,
set the setting to Mode 1.
LAN
Wake-up on LAN
This feature lets the computer’s power be turned on when it receives a
wake-up signal from the LAN.
Built-in LAN
LED
LED ON/OFF
This feature allows you to set conditions for Front Edge Logo LED,
touchpad illumination LED and Function button backlight LED. (Depending
on the model you purchased)
If the function does not work with Mode-1 setting, charge it to Mode-2.
Some external devices may not be able to use this function in either mode.
When this happens, change the setting to [Disabled].
Enabled (Mode 1) Enables Sleep and Charge function Mode 1.
Enabled (Mode 2) Enables Sleep and Charge function Mode 2.
Disabled Disables Sleep and Charge function. (Default)
Enabled Enables the Wake-up on LAN. (Default)
Disabled Disables the Wake-up on LAN.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Wake-up on LAN does not work without the AC adaptor. Leave it
connected, if you are using this feature.
Enabled Enables built-in LAN functions. (Default)
Disabled Disables built-in LAN functions.
ON On. (Default)
OFF Off.