Toshiba A300 - Manual (Page 57)

User’s Manual 2-19
A300/A300D
Replacing the batteries
When the batteries in the remote controller reach the end of their life, the
remote controller may not operate correctly or work only within a short
distance from your computer. In this instance, you should purchase new
batteries and replace the discharged ones.
1. Open the battery cover on the back side of the remote controller.
2. Hold down the stopper and slide the battery out of battery case.
Figure 2-15 Removing the batteries
3. Insert the battery in place. Be sure to place the batteries with correct
polarities. Press the battery down to the stopper then push it forward to
fit into the battery case.
4. Close the battery cover. Close the cover securely until it clicks.
Placing remote controller
Inserting a remote controller
To insert the remote controller, follow the setps below.
1. Make sure the ExpressCard slot is empty.
2. Set the front side upward and insert the remote controller.
Figure 2-16 Inserting the remote controller
3. Press gently to ensure a firm connection.
Battery Stopper
Remote controller