Topcom Butler 575 Plus - Manual (Page 67)

67
Butler 575 plus
• On the display “RETYPE PIN :” is shown.
• Enter the new Master PIN code for the 2nd time.
• Press the OK button to confirm.
ATTENTION : Do not forget your personal PIN code !
5.15 Base unit Reset
The user can reset the base unit to default factory values. This reset also desubscribes
all connected handsets. There are two possibilities:
1: RESET ALL
Subscribed handsets No handsets subscribed
2: INITIALIZE
All default parameters have been reset.
Base unit ring volume Level #9
Base unit ring melody Melody #4
Master PIN code 1590
Call Barring All barred numbers and the assigned
handsets are cleared.
5.15.1 To reset the default settings base unit
• Press the Function button until “BASE SETTING”
is displayed.
• Press the OK button.
• Press the Function button until “BASE RESET :”
is shown.
• Press the OK button and select the “INITIALIZE”
menu.
- When the OK button is pressed, all current
values are erased.
- When the Function button is pressed and the
“RESET ALL” menu is selected, all subscription
data will be erased after pressing the OK button.
• The handset returns to the “NOT SUB” menu and
needs to be subscribed again to a base unit
(see 5.3 Subscribing a handset to a base station).
RETYPE PIN:
BASE SETTING
BASE RESET
I N I T I A L I Z E
RESET ALL
NOT SUB