N (30), Tton (30), On (30) – Sony SLV-SE210G User Manual

Page 30

Advertising
background image

30

Recording TV programmes

To check the remaining time

Press

DISPLAY. With the display on, press COUNTER/REMAIN to

check the remaining time. Each time you press COUNTER/REMAIN, the
time counter and the remaining time appear alternately.

In order to get an accurate remaining time indication, be sure TAPE
SELECT in the USER SET menu is set according to the tape type you use
(see page 44).

To watch another TV programme while recording

To save a recording

To prevent accidental erasure, break off the
safety tab as illustrated. To record on the
same tape again, cover the tab hole with
adhesive tape.

Tips

• To select a programme position, you can use the programme number buttons on the

remote commander. For two-digit numbers, press the - (ten’s digit) button
followed by the programme number buttons.

• If you connect additional equipment to an input connector, you can select the input

signal using the INPUT SELECT or PROG +/– buttons.

• The

DISPLAY information appears on the TV screen indicating information

about the tape, but the information won’t be recorded on the tape.

• If you don’t want to watch TV while recording, you can turn off the TV.
• The remaining tape length may not be indicated accurately for short tapes such as

E-20 or E-30, or tapes recorded in the LP mode.

1

Press t TV/VIDEO to turn off the VCR indicator in the display
window.

2

Select another programme position on the TV.

4 6

1 :

R E M A I N

2 2

0

0

0

:

:

S P

Remaining time

Time counter

Safety tab

Advertising