Sony SLV-SE210G - Manual (Page 38)

38 Setting the timer manually
Tips
• Even if you set TIMER METHOD to VIDEOPLUS in the USER SET menu, you
can set the timer manually. Press MENU to select TIMER PROGRAMMING,
then go to step 2.
• To check, change, or cancel the programme setting, see “Checking/changing/
cancelling timer settings” (page 41).
• To set the tape speed, you can also use the SP/LP button.
Notes
• When setting the timer with VPS/PDC signals, enter the start and stop times
exactly as indicated in the TV programme guide. Otherwise, the VPS/PDC
function won’t work.
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit
VPS/PDC signals, the VCR will start recording at the set time without using the
VPS/PDC function.
• The and indicators flash in the display window when you press ?/1 with
no tape inserted.