Paging, Call forward override ([dss] override), Night transfer – Toshiba Strata DK 2000-series User Manual
Page 143
Strata DK Digital Telephone 6/00
131
Paging
You can make an announcement page to a group of station telephone speakers selected
in system programming with
$OO &DOO 3DJH
on the DSS console.
6'
(if
programmed) on either the DSS console or the DADM can be used for page
announcements. See
Call Forward Override ([DSS] Override)
Either the DSS buttons on your DSS console or the associated telephone can be set in
system programming to ring stations that are in the Call Forward mode, instead of
being forwarded. Usually the console’s telephone is the unit activated to perform this
function. Among other applications, this feature can be used to notify a person who
forgets to deactivate the Call Forward feature after returning to the office.
Important!
DSS buttons on DADMs cannot override Call Forward.
➤
To override call forward with the console’s associated telephone
➤
To override call forward with your DSS Console
➤
Press the station [DSS] set for call forward.
Night Transfer
You can use the DSS console to make the system ring different telephones for
incoming calls during different times of the day. For further details, refer to the Strata
DK System Administrator’s User Guide.
➤
To enable/disable night transfer
➤
Press
1LJKW 7UDQVIHU
to toggle night transfer ON/OFF.
1. Press
&QI7UQ
or
[PDN].
2. Dial the station
number set for call
forward.
Make the call as you would from any other station.
This procedure assumes your station has a typical
program setting.