Toshiba E-STUDIO 232 - Manual (Page 66)

64 3.SETTING ITEMS (USER)
3
1. SETTING GENERAL FUNCTIONS
Setting the Auto Clear Mode
This function sets how long the machine waits before clearing the previous functions set on the control
panel.
1 Press the [USER FUNCTIONS] button on the control panel to enter the
User Functions menu.
2 Press the [USER] button, and then press the [GENERAL] button on
the touch panel.
• The GENERAL menu is displayed.
3 Press the [AUTO CLEAR] button.
• The AUTO CLEAR screen is displayed.
4 Press the button that indicates the desired time in seconds.
• The Auto Clear mode has been set to selected time.
• If you want to disable the Auto Clear mode, press the [NO LIMIT] button.
• Even if the [NO LIMIT] button is selected, the screen will be cleared after 45 seconds in case that users oper-
ate in the USER FUNCTION, JOB STATUS, or TEMPLATE screen.