Toshiba E-STUDIO 232 - Manual (Page 74)

72 3.SETTING ITEMS (USER)
3
4. SETTING SCAN FUNCTIONS
You can change the initial setting (default setting) of scan job.
The [SCAN] button in the [USER] menu will be available only when the Scanner Kit is installed, or when
the Printer/Scanner Kit is installed.
1 Press the [USER FUNCTIONS] button on the control panel to enter the
User Functions menu.
2 Press the [USER] button, and then press the [SCAN] button on the
touch panel.
• The SCAN screen is displayed.
3 Specify the following items as you require.
• In the “SINGLE/2-SIDE SCAN” option, press the desired mode button.
[SINGLE] — Press this to set single page scan as default scan mode.
[BOOK] — Press this to set book scan mode as default scan mode. This enables to scan both side of originals
in the same direction.
[TABLET] — Press this to set tablet scan mode as default scan mode. This enables to scan front page in the
general direction, and scan back page rotated 180 degree.
• In the “ROTATION” option, press the desired mode button.
• In the “ORIGINAL MODE” option, press the desired mode button applied for scans.
• In the “RESOLUTION” option, press the desired mode button applied for scans.
4 Press the [Next] button to display the next screen.