True Fitness Z9 - Manual (Page 70)

Z 8 a n d Z 9 S e r i e s Tr e a d m i l l O w n e r ' s G u i d e 8
C
ar
e
and
M
ain
tenan
C
e
Your TRUE Z-Series treadmill is equipped with built in diagnostic capabili-
ties to assist in configuring, maintaining and servicing your treadmill. The
Field Diagnostic mode provides total hours, distance, average speed, ability
to change the units of measure, ability to set the “user not present” func-
tion, a list of service and error codes, the ability to set program time, and a
log of the last five errors.
NOTE: Messages appear in the Message Center on the Z8.1, Z9, Z9.1 and
Z9.15. The messages display differently on the Z8 and appear in the Pri-
mary Display Window. They are shown in parentheses.
1. Hold the (minus/plus) while placing the Safety Key on the Keyboard.
The following messages will repeat themselves:
DIAGNOSTIC (diAg)
PRESS START
2. Press (up arrow) to display total hours.
The following messages will display:
HOURS (ttL) No. of hours on the treadmill
3. Press (up arrow) to display total distance.
The following messages will display:
DISTANCE (dIS) No. of miles on the treadmill
4. Press (up arrow) to display average speed.
The following messages will display:
AVG SPEED (ASP) average speed on the treadmill
5. Press (up arrow) to display units. Press (plus) or (minus) to toggle.
The following messages will display:
UNITS ENG(Eng) or MET (H)
d
iagnoStiCS
Diagnostics
C
are and
m
aIntenanCe