TechniSat DIGITY 1 - Manual (Page 10)

5 Installation
Now that you have connected your new receiver, and have commenced operating it, you
can, if necessary, optimize its functions for your needs.
5.1 OSD Language
This menu point gives you the option of setting the language according to your preferences.
In order to select a different OSD language, proceed as follows:
>
Press the Menu key to display the Main Menu.
> Now select the menu line OSD Language, which you can mark by means of the
arrow up/down keys.
> Confirm by pressing
OK.
The sub-menu OSD Language will be displayed.
> Use the arrow up/down keys to mark the language selected. Use the arrow
up/down keys to move the marker up or down one line at a time, or use the
arrow left/right keys to move forward or back one page at a time.
> Store the selection by pressing the OK key.
> Press the
Back key to return to the Main Menu.
5.2 Basic settings
In order to obtain optimum use from your DVB receiver, you should adjust it to your personal
preferences.
>
Press the Menu key to display the Main Menu.
> Select the menu line
Settings by means of the arrow up/down keys.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.
> Select the menu line
Basic settings by means of the arrow up/down keys.
> Confirm by pressing OK.
10
bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 10